Petrol Brush Cutter
10596
Instructions for Use
Please read and retain these instructions for future reference
v001: 18/10/16
Page No. 16
Adjust the gap (0.3-0.4mm)
Hard to start
1.
Throttle control not set properly.
2.
Dirty air filter
3.
Bad spark plug or improper gap
4.
Stale or dirty fuel
5.
Loose spark plug wire
6.
Carburettor out of adjustment
1.
Place throttle control in “Fast”
position.
2.
Clean or replace air filter.
3.
Replace spark plug or adjust
gap.
4.
Drain fuel tank and
carburettor, fill with fresh
fuel.
5.
Make sure plug wire is seated
properly on plug.
6.
Make necessary adjustments.
When idling, the
engine is too fast
1.
Cold engine.
1.
Heat up slowly, turn down the
choke if necessary.
The engine will not
stop
1.
The plug is pale grey with marks of
white-hot (melting drops)
2.
Carbon residue in the ignition area.
1.
Fit in the plug of higher
thermal value.
2.
Clean the cylinder head,
piston bottom and…
Excessive
bounce/Difficult
Handling
1.
Ground too dry and hard.
2.
Wheels and depth stake incorrectly
adjusted.
1.
Moisten ground or wait for
more favourable soil
conditions.
2.
Adjust wheels and depth
stake.
DISPOSAL:
•
Dispose of all packaging, paper, cartons and plastic, plastic bags in accordance with your
local recycling regulations.
•
At the end of the product’s lifespan please dispose of it at an authorised household WEEE
waste recycling centre.
