Petrol Brush Cutter
10596
Instructions for Use
Please read and retain these instructions for future reference
v001: 18/10/16
Page No. 11
Never use oil for 4-cycle engine or water cooled 2-cycle engine. It can cause spark plug fouling
exhaust port blocking or piston ring sticking.
Mixed fuels which have been left unused for a period of one month or more, may clog he
carburettor or result in engine failing to operate properly. Put remaining fuel into an airtight
container and keep it in a dark and cool room.
Mix a regular grade gasoline (leaded or unleaded, alcohol-free) and a
quality-proven motor oil for air-cooled 2 cycle engines.
RECOMMENDED MIXING RATIO GASOLINE 25:OIL1
7.
OPERATION
STARTING THE ENGINE
WARNING
Before starting the engine, inspect the entire unit for loose fittings or fuel leaks, and the cutting
attachment is properly installed and securely fastened.
Place the unit on a flat, firm place. Keep the cutting head clear of everything around it.
1.
Turn the cap to the fuel tank to make sure that it is fixed on
tightly. (F8)
2.
Pump the fuel pump bulb until fuel is visible and flows freely
in the clear fuel tank return hose.
(1) Tank cap
(2) fuel tank
(3) Fuel pump bulb
3.
Move the choke lever to the closed position. (F9)
(1) Choke lever
(2) Close
(3) Open
NOTE
When restarting immediately after stopping the engine, move the
choke lever to the open position.