number
Cordless Rechargeable Saw
10246
Instructions
v1.0: 25.11.15
Recharging the battery
Charge the battery before first use and whenever it fails to provide sufficient power on jobs that were
easy to perform previously.
The battery may become warm while charging, this is normal and does not indicate a problem.
Note
: After several charges and discharge cycles, the battery will attain full capacity.
Do not charge the battery at ambient temperatures below 4 degrees Celsius or above 40 degrees
Celsius.
Before switching the product on, make sure that the voltage of your electricity supply corresponds
with what is indicated on the rating label.
Plug the charger in and switch on at the socket. The battery charger indicator lights will illuminate.
Insert the battery and charging to progress. The indicator lights up red during charging.
The battery is completely charged when the indicator lights up green.
Disconnect the charger when not in use, and store in a dry place.
Your battery pack should charge in 4 hours.
Always allow your battery to cool down before charging.
Do not charge the battery pack in temperatures below 4 degrees Celsius or above 40 degrees Celsius
as this could cause serious damage to the battery.
If the battery fails to charger properly, check that you plug socket is working properly.
Do not continue using this product with its battery pack in a depleted condition.
To prolong battery life, avoid leaving the battery pack on charge for extended periods of time.
There is no need to run the batteries down completely before recharging. Normal usage is the best
method of discharging and recharging the batteries.
Operation
Use only saw blades suitable for the material being worked.
Warning
: Remove the battery from the saw before inserting/ replacing the saw blade.
Severe injury or death could be occur from body contact with moving blades.