PTC Ceramic Heater
H961
Instructions for Use
Please read and retain these instructions for future reference
v001: 21/05/21
In standby
mode
el
SB
N/A
W
Two or more manual stages, no room
temperature control
[no]
With mechanic thermostat room
temperature control
[yes]
With electronic thermostat room
temperature control
[no]
Electronic room temperature control plus
day timer
[no]
Electronic room temperature control plus
week timer
[no]
Other control options (multiple selections
possible)
Room temperature control, with
presence detection
[no]
Room temperature control, with open
window detection
[no]
With distance control option
[no]
With adaptive start control
[no]
With working time limitation
[no]
With black bulb sensor
[no]
Contact details
CLEANING THE HEATER
1.
Always unplug the heater from the wall socket and allow it to cool down before cleaning.
2.
Clean the outside of the heater by wiping with a damp cloth and buff with a dry cloth.
3.
Do not use any detergents or abrasives and do not allow any water to enter the heater.
STORING THE HEATER
When the heater is not used for long periods of time it should be protected from dust and stored in a clean
dry place.
PLUG WIRING (UK & IRELAND)
This appliance is fitted with a BS 1363
10-amp
plug. If you have to replace the fuse, only those that are
ASTA or BSI approved to BS1362 and with a rated current of
10-amps
should be used. If there is a fuse
cover fitted, this cover must be re-fitted after changing the fuse. If the fuse cover is lost or damaged the
plug must not be used. Spare fuse holders and fuses are available from electrical outlets. If the socket
outlets in your home or office are not s
uitable for this product’s plug, the plug must be removed and
disposed of safely. Attempts to insert the plug into the wrong socket is likely to cause electric hazard. A
replacement plug should be wired according to the following instructions:
