PTC Ceramic Heater
H961
Instructions for Use
Please read and retain these instructions for future reference
v001: 21/05/21
16.
Do not place this heater near flammable materials, surfaces or substances, as there may be a risk of
fire.
17.
Particular care should be taken when the heater is situated in areas occupied by children or invalids.
18.
Always unplug the heater when moving it.
19.
The room which is to be heated should not contain any easy inflammable materials (e.g., petrol,
solvents, spray canisters etc.) or other easy combustible materials (e.g., wood or paper). Keep such
materials away form equipment. Risk of fire!!
20.
Do not operate the heater with a damaged cord or plug, or after the heater malfunctions, has been
dropped, or damaged in any manner.
21.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
22.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
23.
Children should be supervised to ensure that they do not play with the appliance.
OPERATION OF THE HEATER
NOTE: It is normal when the heaters are turned on for the first time or when they are turned on after
having not been used for a long period of time the heaters may emit some smell and fumes. This will
disappear when the heater has been on a short while.
SAFETY FEATURES
：
1.
A thermal overload protector is built in to prevent overheating.
2.
When an overheat temperature is reached, the Heater will be automatically shut off. It can only resume
operation when the user resets the unit.
(See reset instructions below)
To Reset the Heater :
1.
Unplug the Heater and wait 5-10 minutes for the unit to cool down.
2.
Then, turn on the unit again and operate normally.
