8Ft Inflatable Santa
H804
Instructions for Use
Please read and retain these instructions for future reference
v001: 16/04/21
SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for power
units.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
Parts Identification
Check to ensure all parts listed are included in the product packaging.
•
Inflatable Figure
•
BS Approved Adaptor
•
Stakes
•
Ropes
To Set Up and Use
1.
Remove contents from packaging.
2.
Plug adaptor into connection at base of Inflatable. Plug adaptor plug into standard wall outlet.
3.
Fan will immediately begin to start the flow of air.
4.
Zip zipper at base of fan. Inflatable will then fully inflate.
5.
To secure the Inflatable Figure to the ground, insert a plastic Stake into the ground through each of
the holes in the lower tabs of the Inflatable Figure. To easily insert stakes into the ground, it is
recommended to wet the ground first. To avoid damaging garden stakes when inserting into the
ground, select a spot in soft, rock-free soil. Insert the base of the stake first then gently insert the
rest of the stake into the base.
6.
To deflate, unplug fan. For faster deflation, unzip zipper after unplugging fan.
Bulb Replacement
1.
Unplug the product from the electrical outlet.
2.
Unzip the back of the character containing the burned-out bulb.
3.
Remove the Bulb from the Bulb Socket.
4.
Follow the “To Set Up and Use” section to operate the product.
Care and Maintenance
•
Periodically check to ensure there are no ruptures or tears in the Inflatable Figure. If you find any
tears in the fabric, you can repair them with needle and regular thread. No special thread is
necessary.
•
Always maintain the air vent of the Motor Base unobstructed and free from dirt and/or debris.
•
Periodically unplug the product from the electrical outlet and allow the Motor to cool to avoid
overheating and/or product damage.
•
Neatly fold and store the product in a cool, dry location that is away from sunlight or heat sources.
Troubleshooting Guide
Item will not fully inflate.
Ensure zippers on the back of each product character are closed.
Ensure fabric collar is securely attached to the fan outlet.
Inspect fabric for tears and holes; repair if necessary.
