background image

 

P84662J 

Page 28 of 28 

 

ANY MATERIAL EXTRAPOLATED FROM THIS DOCUMENT OR FROM COOOPER WHEELOCK MANUALS OR 
OTHER DOCUMENTS DESCRIBING THE PRODUCT FOR USE IN PROMOTIONAL OR ADVERTISING CLAIMS, 
OR FOR ANY OTHER USE, INCLUDING DESCRIPTION OF THE PRODUCT’S APPLICATION, OPERATION. 
INSTALLATION AND TESTING IS USED AT THE SOLE RISK OF THE USER, AND COOPER WHEELOCK WILL 
NOT HAVE ANY LIABILITY FOR SUCH USE. 
 

 

6.0 WARRANTY STATEMENT: 

 

Limited Warranty 

Cooper Wheelock, Inc. products must be used within their published specifications and must be PROPERLY 
specified, applied, installed, operated, maintained, and operationally tested in accordance with these instructions at 
the time of installation and at least twice a year or more often in accordance with local, state and federal codes, 
regulations and laws.  Specification, application, installation, operation, maintenance, and testing must be performed 
by qualified personnel for proper operation in accordance with all of the latest National Fire Protection Association 
(NFPA), Underwriters' Laboratories (UL), Underwriters’ Laboratories of Canada (ULC), National Electrical Code 
(NEC), Occupational Safety and Health Administration (OSHA), local, state, county, province, district, federal and 
other applicable building and fire standards, guidelines, regulations, laws and codes including, but not limited to, all 
appendices and amendments and the requirements of the local authority having jurisdiction (AHJ). Cooper 
Wheelock, Inc. products when properly specified, applied, installed, operated, maintained, and operationally tested 
as provided above are warranted against mechanical and electrical defects for a period of three years from date of 
manufacture (as determined by date code). Correction of defects by Cooper Wheelock, Inc providing repairs or a 
replacement shall be at Cooper Wheelock, Inc.'s sole discretion and shall constitute fulfillment of all warranty 
obligations.  The foregoing limited warranty shall immediately terminate in the event any part not furnished by 
Cooper Wheelock, Inc. is installed in the product. The foregoing limited warranty specifically excludes any software 
required for the operation of or included in a product. 

COOPER WHEELOCK, INC. MAKES NO 

REPRESENTATION OR WARRANTY OF ANY OTHER KIND, EXPRESS, IMPLIED OR STATUTORY WHETHER 
AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER. 
 

Users are solely responsible for determining whether a product is suitable for the user's purposes, or whether it will achieve the 
user's intended results. There is no warranty against damage resulting from misapplication, improper specification, abuse, 
accident, or other operating conditions beyond Cooper Wheelock, Inc.'s control. 
 
Some Cooper Wheelock, Inc. products contain software. With respect to those products, Cooper Wheelock, Inc. does not 
warranty that the operation of the software will be uninterrupted or error-free or that the software will meet any other standard of 
performance, or that the functions or performance of the software will meet the user's requirements. Cooper Wheelock, Inc. shall 
not be liable for any delays, breakdowns, interruptions, loss, destruction, alteration, or other problems in the use of a product 
arising out of or caused by the software. 
 
The liability of Cooper Wheelock, Inc. arising out of the supplying of a product, or its use, whether based on warranty, 
negligence, or otherwise, shall not in any case exceed the cost of correcting defects as stated in the limited warranty and upon 
expiration of the warranty period all such liability shall terminate. Cooper Wheelock, Inc. is not liable for labor costs incurred in 
removal, reinstallation, or for damage of any type whatsoever, including but not limited to, loss of profit or incidental or 
consequential damages. The foregoing shall constitute the sole remedy of the purchaser and the exclusive liability of Cooper 
Wheelock, Inc. 
 
In no case will Cooper Wheelock, Inc.'s liability exceed the purchase price paid for a product. 
 

Limitation of Liability 

Cooper Wheelock, Inc.'s liability on any claim of any kind, including negligence, breach of warranty, or otherwise, for any loss 
or damage resulting from, arising out of, or connected with any contract, or from the manufacture, sale, delivery, resale, repair 
or use of any product shall be limited to the price applicable to the product or part thereof which gives rise to the claim.  Cooper 
Wheelock, Inc.'s liability on any claim of any kind shall cease immediately upon the installation in the product of any part not 
furnished by Cooper Wheelock, Inc. In no event shall Cooper Wheelock, Inc. be liable for any claim of any kind unless it is 
proven that our product was a direct cause of such claim. 

FURTHER, IN NO EVENT, INCLUDING IN THE CASE OF A 

CLAIM OF NEGLIGENCE, SHALL COOPER WHEELOCK, INC. BE LIABLE FOR INCIDENTAL, INDIRECT, 
SPECIAL OR CONSEQUENTIAL DAMAGES.

  Some states do not allow the exclusion or limitation of incidental or 

consequential damages, so the preceding limitation may not apply to all purchasers. 
 
4/07 

 

Содержание POWERPATH PS-24-8MC





























Отзывы: