Cooper safety CEAG Brillant 1883 LED GGLine, Монтаж и эксплуатация, Страница: 14 / 16

14
Mounting and Operating Instructions
Brillant LED Self contained luminaire for ceiling mounting
1883...1884 LED CGLine
6.5 Control LEDs
We reserve the right to make techni-
cal alterations without notice!
7. Inspection/Maintenance/Repair
Observe the valid regulations for the inspection, maintenance and repair of electrical equipement!
8. Disposal / Recycling
When disposing of faulty equipment, observe the valid regulations for recycling and disposal. Plastic
parts are marked with the appropriate symbols.
According to EU directive 2006/66/EG the NiMh-batteries which are installed in the lumin-
aires, has not to be disposed by yourself! Return to the distributor or to an approved dis-
poser!
In case of returns you need a RMA - number from us. For further information see
www.ceag.de!
Coding of the fault display:
Status LED green LED yellow LED red
No failure
� � �
Emergency mode
� � �
Delay-time on mains return
�
Luminaire in function test
� � �
Luminaire in duration test
� � �
Charging fault
� � �
Fault in function test
� � �
Fault in duration test
� � �
Fault with luminescent material
� � �
Indication block mode (with main voltage and activation of CG-Controller only)
Status LED green LED yellow LED red
Block mode
� � �
�
=LED lights up;
�
=LED does not light up;
�
=LED flashes;
Test button funktions
Test button pressed for: Function LED green LED yellow LED red
1 sec. < t < 5 sec. Function test On
� � �
Duration test On / Off
� � �
Duration test delayed
� � �
(1s)
t > 10 sec. Reset of the luminaire
�
( 1s )
�
(1s)
�
(1s)
�
=LED lights up (für 1s);
�
=LED does not light up;
�
=LED blinks;
�
=LED flashes
Monitoring of the adjusted battery mounting / emergency operating time / address of the luminaires
Test button pressed for: Emergency operating time LED green LED yellow LED red
1 h
� � �
3 h
� � �
Example : Address 25
first blinks LED yellow 2 times
than blinks LED red 5 times
�
=LED lights up;
�
=LED does not light up;
�
=LED blinks (Number of digits)
�
Ten digit
10-90
�
One digit
1 - 9
automatically after 2 sec.with
connected CG-Controller CGLine
�
alternately 1 min.
�
�
Hundred
digit 100-400
�
=LED lights up;
�
=LED does not light up;
�
=LED blinks;
�
=LED flashes;
t > 5 sec.
t<1 sec.
Address of the luminares