background image

P84454 K 

Sheet 4 of 4 

If this appliance is required to produce a distinctive three-pulse Temporal Pattern Fire Alarm Evacuation Signal (for total evacuation) in accordance with 
NFPA 72, the appliance must be used with a fire alarm control unit that can generate the temporal pattern signal.  Refer to manufacturer’s installation 
manual for details.

 

 

NOTE:  

NFPA 72/ANSI 117.1 conform to ADAAG Equivalent Facilitation Guidelines in using fewer, higher intensity strobes within the same protected 

area.

 

 

CAUTION:  

Check the installation instructions of the manufacturers of other equipment used in the system for any guidelines or restrictions on wiring 

and/or locating Notification Appliance Circuits (NAC) and notification appliances.  Some system communication circuits and/or audio circuits, for 
example, may require special precautions to assure electrical noise immunity (e.g. audio crosstalk). 
 

NOTE:

  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  These 

limits are designed to provide reasonable protection against harmful interference in residential installation.  This equipment generates, uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio 
communications.  However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:  1) Reorient or relocate the receiving antenna,  2) Increase the separation between the 
equipment and receiver,  3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected, and  4) Consult the 
dealer or an experienced radio/TV technician for help. 
 

ANY MATERIAL EXTRAPOLATED FROM THIS DOCUMENT OR FROM COOPER NOTIFICATION MANUALS OR OTHER DOCUMENTS 
DESCRIBING THE PRODUCT FOR USE IN PROMOTIONAL OR ADVERTISING CLAIMS, OR FOR ANY OTHER USE, INCLUDING DESCRIPTION 
OF THE PRODUCT'S APPLICATION, OPERATION, INSTALLATION AND TESTING IS USED AT THE SOLE RISK OF THE USER AND COOPER 
NOTIFICATION WILL NOT HAVE ANY LIABILITY FOR SUCH USE. 

 

LIMITED WARRANTY 

 
Cooper Notification, Inc. dba Cooper Notification and Cooper Notification, Inc. (each, a “Seller”) products must be used within their published 
specifications and must be PROPERLY specified, applied, installed, operated, maintained and operationally tested in accordance with these instructions 
at the time of installation and at least twice a year or more often and in accordance with local, state and federal codes, regulations and laws.  
Specification, application, installation, operation, maintenance and testing must be performed by qualified personnel for proper operation in accordance 
with all of the latest National Fire Protection Association (NFPA), Underwriter’s Laboratories (UL), National Electrical Code (NEC), Occupational Safety 
and Health Administration (OSHA), local, state, county, province, district, federal and other applicable building and fire standards, guidelines, regulations 
laws and codes including, but not limited to, all appendices and amendments and the requirements of the local authority having jurisdiction (AHJ).  Seller 
products when properly specified, applied, installed, operated, maintained and operationally tested as provided above are warranted against mechanical 
and electrical defects for a period of (a) three (3) years from date of manufacture with respect to MEDC and Seller Industrial Signals and Seller Fire and 
Security Notification Appliances and Devices, or (b) one (1) year from date of manufacture with respect to Waves and SafePath Voice Evacuation and 
Mass Notification Systems (date of manufacture is determined by date code.)  Correction of defects by repair or replacement shall be at Seller’s sole 
discretion and shall constitute fulfillment of all obligations under this warranty.  THE FOREGOING LIMITED WARRANTY SHALL IMMEDIATELY 
TERMINATE IN THE EVENT ANY PART NOT FURNISHED BY SELLER IS INSTALLED IN THE PRODUCT.  THE FOREGOING LIMITED WARRANTY 
SPECIFICALLY EXCLUDES ANY SOFTWARE REQUIRED FOR THE OPERATION OF OR INCLUDED IN A PRODUCT.  SELLER MAKES NO 
REPRESENTATION OR WARRANTY OF ANY OTHER KIND, EXPRESS, IMPLIED OR STATUTORY WHETHER AS TO MECHANTABILITY, FITNESS 
FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER. 
 
USERS ARE SOLELY RESPONSIBLE FOR DETERMINING WHETHER A PRODUCT IS SUITABLE FOR THE USER’S PURPOSES, OR WHETHER 
IT WILL ACHIEVE THE USER’S INTENDED RESULTS.  THERE IS NO WARRANTY AGAINST DAMAGE RESULTING FROM MISAPPLIACATION, 
IMPROPER SPECIFICATION, ABUSE, ACCIDENT OR OTHER OPERATING CONDITIONS BEYOND SELLER’S CONTROL. 
 
SELLER DOES NOT WARRANT THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE OR THAT THE 
SOFTWARE WILL MEET ANY OTHER STANDARD OF PERFORMANCE, OR THAT THE FUNCTIONS OR PERFORMANCE OF THE SOFTWARE 
WILL MEET THE USER’S REQUIREMENTS.  SELLER SHALL NOT BE LIABLE FOR ANY DELAYS, BREAKDOWNS, INTERRUPTIONS, LOSS, 
DESTRUCTION, ALTERATION, OR OTHER PROBLEMS IN THE USE OF A PRODUCT ARISING OUT OF OR CAUSED BY THE SOFTWARE. 
 
THE LIABILITY OF SELLER ARISING OUT OF THE SUPPLYING OF A PRODUCT, OR ITS USE, WHETHER ON WARRANTIES, NEGLIGENCE, OR 
OTHERWISE, SHALL NOT IN ANY CASE EXCEED THE COST OF CORRECTING DEFECTS AS STATED IN THE LIMITED WARRANTY AND UPON 
EXPIRATION OF THE WARRANTY PERIOD ALL SUCH LIABILITY SHALL TERMINATE.  SELLER IS NOT LIABLE FOR LABOR COSTS INCURRED 
IN REMOVAL, REINSTALLATION OR REPAIR OF A PRODUCT BY ANYONE OTHER THAN SELLER OR FOR DAMAGE OF ANY TYPE 
WHATSOEVER, INCLUDING BUT NOT LIMITED TO, LOSS OF PROFIT OR INCIDENTAL, INDIRECT, CONSEQUENTIAL, SPECIAL, PUNTIVE OR 
EXEMPLARY DAMAGES.  THE FOREGOING SHALL CONSTITUTE THE SOLE REMEDY OF THE PURCHASER AND THE EXCLUSIVE LIABILITY 
OF SELLER. 
 
IN NO CASE WILL SELLER’S LIABILITY EXCEED THE PURCHASE PRICE PAID FOR A PRODUCT. 
 

LIMITATION OF LIABILITY 

 
SELLER’S LIABILITY ON ANY CLAIM OF ANY KIND, INCLUDING NEGLIGENCE AND BREACH OF WARRNTY, FOR ANY LOSS OR DAMAGE 
RESULTING FROM, ARISING OUT OF, OR CONNECTED WITH THIS CONTRACT, OR FROM THE MANUFACTURE, SALE, DELIVERY, RESALE, 
REPAIR OR USE OF ANY PRODUCT COVERED BY THIS ORDER SHALL BE LIMITED TO THE PRICE APPLICABLE TO THE PRODUCT OR PART 
THEREOF WHICH GIVES RISE TO THE CLAIM.  SELLER’S LIABILITY ON ANY CLAIM OF ANY KIND SHALL CEASE IMMEDIATELY UPON THE 
INSTALLATION IN THE PRODUCT OF ANY PART NOT FURNISHED BY SELLER.  IN NO EVENT SHALL SELLER BE LIABLE FOR ANY CLAIM OF 
ANY KIND UNLESS IT IS PROVEN THAT ITS PRODUCT WAS THE DIRECT CAUSE OF SUCH CLAIM.  FURTHER, IN NO EVENT, INCLUDING IN 
THE CASE OF A CLAIM OF NEGLIGENCE, SHALL SELLER BE LIABLE FOR INCIDENTAL, INDIRECT, CONSEQUENTIAL, SPECIAL, PUNITIVE OR 
EXEMPLARY DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, 
SO THE PRECEDING LIMITATION MAY NOT APPLY TO ALL PURCHASERS. 

 
11/09 

Содержание ET70-24MCCH Series

Страница 1: ...IFICATIONS Table 1 UL Listed Models and Ratings Models Speaker Strobe Voltage VRMS dBA at 10 Feet Rated Watts Regulated Voltage VDC VRMS Voltage Range VDC VRMS Candela 1 8 1 4 1 2 1 2 4 8 ET90 24MCCH 25 70 75 78 81 84 87 90 93 24 16 0 33 0 115 177 ET70 24MCCH 25 70 75 78 81 84 87 90 93 24 16 0 33 0 115 177 NOTES 1 The strobe will produce 1 flash per second over the Regulated Voltage range 2 Strobe...

Страница 2: ...N OR ROUND BACKBOXES MOUNTING HOLES ARE FOR SINGLE GANG DOUBLE GANG NOTE BACKBOX IS COMPATIBLE WITH WIREMOLD AND CONDUIT SURFACE MOUNTING B 8 32 SCREWS BACKBOX SBB SURFACE PLATE MOUNTING SPEAKER SQUARE GRILLE SCREWS 6 19 STROBE SPEAKER MAXIMUM NUMBER OF CONDUCTORS AWG 18 AWG 16 AWG 14 AWG 12 8 8 8 8 Figure 1 Figure 2 STROBE COM OPTIONAL FROM PRECEDING SPEAKER OR FIRE ALARM CONTROL PANEL FACP FROM ...

Страница 3: ...ly important for stiff heavy gauge wires and wires with thick insulation or sheathing 5 These models have an integrated speaker mounting plate which must be oriented correctly when it is mounted to the backbox Turn the speaker mounting plate so that the arrow above the words Horizontal Strobe points to the top side of the speaker mounting plate 6 To move selector switch insert screwdriver into slo...

Страница 4: ...operly specified applied installed operated maintained and operationally tested as provided above are warranted against mechanical and electrical defects for a period of a three 3 years from date of manufacture with respect to MEDC and Seller Industrial Signals and Seller Fire and Security Notification Appliances and Devices or b one 1 year from date of manufacture with respect to Waves and SafePa...

Отзывы: