Catalog #
Type
Project
COMBOLIGHT® COMBO CLASSIC RECESSED
LAMP GROUP 1 - CONFIGURATION “D”
TWO (2) Halogen lamp cells - TWO (2) Fluorescent lamp cells
New Construction Recessed Housing - Trim or Trimless
ORDERING EXAMPLE:
= Two MR16 50W lamps with Two BIAX® 40W Fluorescent • Double Wide • • Black Interior • White Trim • 120 volts
CR11650
D
BX40
BK
WH
120
Fluorescent >>
BX40
BX50
PLL80 PLT26
PLT32
PLT42
T528
T535
T5HO39 T5HO54
Lamp Group 1
A
59.78” 59.78” 59.78” 24.78” 25.78” 27.78” 106.78” 130.78”
82.78”
106.78”
B
71.58” 71.58” 71.58” 35.58” 40.08” 39.58” 118.58” 142.58”
94.58”
118.58”
C
25.50” 25.50” 25.50”
8.00”
8.50”
9.50”
49.00” 61.00”
37.00”
49.00”
RSA
LIGHTING
®
RSA LIGHTING LLC 9660 - 9700 TOPANGA CANYON BLVD. CHATSWORTH CA. 91311
TOLL FREE: 800-356-3030 • 818-349-3030 • FAX: 818-349-3031 • www.rsalighting.com
©2003 RSA Lighting LLC All Rights Reserved • Specifications subject to change without notice.
SPECIFY -
D
380º x 45º locking
angular adjustment
45º visual cut-off
Dual Fluorescent lamp cells
w/ integral ballast accessible
from below
Integral reflector
Integral reflector
Butterfly
Brackets
for Black Iron
Mounting
Thermal Protector
Electronic
Low Voltage
Transformers
0.75" Trim
4.30"
6.88"
6.00"
4.20"
4.20"
B
A
C
C
Ceiling compund
is applied right
to the edge of the
fixture opening
TRIMLESS D
ET
A
IL
TR
IM
DETAIL
Must specify a diffuser or louver
for fluorescent cell. See below.
Ballast
Ballast
Optional Accessories - See RSA Combo Classic accessory page for details.
Baffle
Snoots
Louvers
Lenses
Fluorescent Diffusers and Louvers - Please specify
❑
TWD -
Textured White Diffuser
❑
CB1 -
2” Parabolic Louver
❑
MPD -
Conical Prism Diffuser
❑
CB2 -
1” Parabolic Louver
Custom configurations are available with Combo Classic fixtures.
Also available with T8 fluorescent lamps. Consult RSA for details
DESCRIPTION:
An adjustable recessed fixture
suitable for multiple downlighting
applications with one point of elec-
trical entry. Mixes the use of low
voltage halogen lamps with fluo-
rescent lamps. Powder coat finish
on housing & lamp assembly.
CONSTRUCTION:
Housing, Plaster Frame & Trim
Assembly: 18 gauge CRS. J-Box
Assembly: 16 gauge CRS (galva-
nized). Fixture is offered with a .75”
ceiling trim or as a trimless fixture.
Can accommodate 0.50” to 1.00”
ceiling thickness.
LAMP ASSEMBLY:
Two low voltage halogen lamp
cells with two fluorescent lamp
cells . Can accept up to two optical
accessories. 380º x 45º locking
lamp adjustment. Provides 45º
visual cut-off.
SYSTEM PROTECTION:
Thermal protection provided to
guard against overheating, and
misuse of insulation over and
around fixture. Vent holes in hous-
ing provide cooler operation
ELECTRICAL:
Fixture is two circuit.
Circuit 1
: Integral electronic trans-
former for low voltage lamps.
Fused and short circuit protection.
Dimmable.
Circuit 2:
Integral electronic bal-
lasts for fluorescent lamps.
Lutron® dimming ballasts avail-
able upon request.
Junction box is UL listed for
through branch wiring, for 8 #12,
90°C supply conductors or 60°C for
end of run (access above ceiling
not required).
Made in the USA
.
Item # / Lamp Type
Configuration
Fluorescent Lamp Cell
Interior Finish
Trim Finish
Voltage
Lamp
Group 1
CR11650 -
MR16 12V 50W
D -
Two Low Voltage Halogen
lamp cells with Two
Fluorescent lamp cells
BX40 -
40W BIAX®
BK -
Black
BK -
Black
120 -
120 Volts
CR11675 -
MR16 12V 75W
BX50 -
50W BIAX®
WH -
White
WH -
White
277 -
277 Volts
CR17020 -
AR70 12V 20W
PLL80 -
80W PL-L
S -
Silver
S -
Silver
CR17050 -
AR70 12V 50W
PLT26 -
26W PL-T
PT -
Custom
PT -
Custom
PLT32 -
32W PL-T
TR -
Trimless
PLT42 -
42W PL-T
T528 -
28W T5
T535 -
35W T5
T5HO39 -
39W T5HO
T5HO54 -
54W T5HO
T8 lamps also available
