Cooper Instruments & Systems DFI 1550 Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 56

background image

CF 126

52

Nov 2001

   5 digit, bipolar display                   = 0
   Count by one digit                        = 0
   Enable display averaging             = 64
Sending "#000BWQ66

↵

" will change display operation accordingly.

Reply

When writing: "OK" or "ERROR".
When reading: an ASCll-floating-point value described above.

RT/WT

Read/write Front Panel Switch Operation

Purpose

Reads or writes the operation the front panel switches when the Protection jumper is
installed.

Usage

"#aaccRT

↵

" to read, "#aaccwTn.

↵

" to write.

# is the 'pound' or 'hash' character (ASCII decimal 35).
aa is the two-character instrument address.
cc is the two-character channel number.
n is the argument defined below.

↵

is the 'carriage return' character (ASCII decimal 13).

Argument

The argument is created by adding together the values of the desired options as shown.
[VALUE]                 Value                        [CLEAR]            Value
ENABLED                0.                        ENABLED                0.
DISABLED               8.                        DISABLED               4.

[CHANNEL]         Value                        [TARE]                  Value
ENABLED                0.                          ENABLED               0.
DISABLED               2.                          DISABLED              1.

Example

It is desired to disable the [TARE] button for channel 02 when the Protection jumper is
installed. Sending "#0002WT1.J" will accomplish this.

Reply

When writing: "OK" or "ERROR".
When reading: an ASCll-floating-point value described above

Remarks

If a disabled front panel button is pressed, the message "PROTECTED" will appear on
the display.

Warranty and Repair Policy

LIMITED WARRANTY ON PRODUCTS

Any of our products which, normal operating conditions, proves defective in material or in workmanship

within one year from the date of shipment by COOPER, will be repaired or replaced free of charge

provided that you obtain a return material authorization from COOPER and send the defective product,

transportation charges prepaid with notice of the defect, and establish that the product has been properly

installed, maintained, and operated within the limits of rated and normal usage. Replacement or required

product will be shipped F.O.B. our plant. The terms of this warranty do not extend to any product or part

thereof which, under normal usage, has an inherently shorter useful life than one year. The replacement

warranty detailed here is the buyer’s exclusive remedy, and will satisfy all obligations of COOPER

whether based on contract, negligence, or otherwise. COOPER is not responsible for any incidental or

consequential loss or damage which might result from a failure of any and all other warranties, express or

implied, including implied warranty of merchantability or fitness for particular purpose. Any unauthorized

disassembly or attempt to repair voids this warranty.

OBTAINING SERVICE UNDER WARRANTY

«
...
53
54
55
56
»

Содержание DFI 1550

























































Отзывы:

Нет отзывов

Похожие инструкции для DFI 1550

SyncMaster P50FP

Бренд: Samsung Страницы: 102

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 52

Бренд: IEI Technology Страницы: 132

Бренд: ISIC Страницы: 21

Бренд: IEI Technology Страницы: 118

Бренд: WINAICO Страницы: 15

Бренд: Avalue Technology Страницы: 36

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 1

Бренд: Samsung Страницы: 1

Бренд: Samsung Страницы: 1

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 1

Бренд: Samsung Страницы: 1

Бренд: Samsung Страницы: 1

Бренд: Samsung Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды