English
18
1. Loosen knurled cap to remove tip and tip housing.
2. Push up switch ring marked (A) and turn to right. Gas will start to flow.
Set mark °between “ON“-1.
3. Ignite by using a match or lighter as shown in above illustraion.
4. Adjust amount of flame by switch ring (1-3).
5. To turn off, slide the switch ring to “OFF“ position.
4. CAUTION
1. Do not fill gas or store near open flame, heater, furnace or combustible
materials.
Do not store at places under direct sunshine or any places that will exceed
40°C.
2. Do not store the Pyropen Jr. in the dash-board of a car.
3. Keep out of reach of infants.
4. When not in use, be sure that switch ring is at “OFF“ position.
SWITCH RING
3. HOW TO USE THE TOOL AS TORCH
PK Elektronik Vertriebs GmbH, E-Mail: [email protected], Internet: www.pkelektronik.com
