background image

MAINTENANCE

Perform visual, electrical, and mechanical inspections on a regular
basis.  The environment and frequency of use should determine this.
However, it is recommended that checks be made at least once a
year.  We recommend an Electrical Preventive Maintenance Program
as described in the National Fire Protection Association Bulletin
NFPA 70B: Recommended Practice for Electrical Equipment
Maintenance (www.nfpa.org).  

The lens should be cleaned periodically to insure continued lighting
performance.  To clean, wipe the reflector, then the lens with a clean
damp cloth.  If this is not sufficient, use a mild soap or a liquid
cleaner such as Collinite NCF or Duco #7.  Do not use an abrasive,
strong alkaline, or acid cleaner.  Damage may result.

Visually check for undue heating evidenced by discoloration of wires
or other components, damaged parts, or leakage evidenced by water
or corrosion in the interior.  Replace all worn, damaged, or
malfunctioning components and clean gasket seals before putting
the luminaire back into service. 

Electrically check to make sure that all connections are clean and
tight.

Mechanically check that all parts are properly assembled.

REPLACEMENT PARTS

Cooper Crouse-Hinds Pauluhn HazFlood DFL nR Series Floodlights are
designed to provide years of reliable lighting performance.  However,
should the need for replacement parts arise, they are available through
your authorized Cooper Crouse-Hinds Pauluhn distributor.  Assistance
may also be obtained through your local Cooper Crouse-Hinds Pauluhn
representative or the Cooper Crouse-Hinds Pauluhn Sales Service
Department, 1616 North Main Street, Pearland, Texas 77581, Phone 800-
826-5890.

WIRING DIAGRAMS

All statements, technical information and recommendations contained herein are based on information and tests we believe to be reliable.
The accuracy or completeness thereof are not guaranteed. In accordance with Cooper Crouse-Hinds "Terms and Conditions of Sale," and
since conditions of use are outside our control, the purchaser should determine the suitability of the product for his intended use and
assumes all risk and liability whatsoever in connection therewith.

IF 1620

Cooper Crouse-Hinds Pauluhn

Revision 1

1616 North Main Street, Pearland, Texas 77581 •  U.S.A.

New 03/11

Copyright© 2011, Cooper Industries, Inc.

Содержание Paulihn hazFlood DFL Series

Страница 1: ...Hz or 60 Hz and light sources High Pressure Sodium HPS Metal Halide MH in ratings of 150 through 400 watts WARNING To avoid the risk of fire explosion or electric shock this product should be installed inspected and maintained by a qualified electrician only in accordance with all applicable electrical codes WARNING To avoid electric shock Be certain electrical power is OFF before and during insta...

Страница 2: ...portable cord or other extra hard usage portable cord into the GRFX outlet box using a Crouse Hinds NCG75 75 cable connector See Figure 5 The cord length required will allow ample slack to adjust the aiming angle of the floodlight Figure 3 Pole Mount with SFA6 Slipfitter CGB294SA 16 3 Type SOW Cord Figure 4 GASK643 GRF10SA S752 GRFX229 S752 Figure 5 Wall Mount with Outlet Box 16 3 Type SOW Cord NC...

Страница 3: ...wer on LAMP INSTALLATION REPLACEMENT 1 Note both vertical and radial aiming angles If these are disturbed during relamping they should be readjusted after relamping 2 Disconnect power to the floodlight and allow to cool completely Allow the capacitor to discharge for 15 minutes 3 Completely loosen the 6 captive cover screws and swing open the cover See Figure 7 4 Remove lamp 5 Perform cleaning and...

Страница 4: ...k to make sure that all connections are clean and tight Mechanically check that all parts are properly assembled REPLACEMENT PARTS Cooper Crouse Hinds Pauluhn HazFlood DFL nR Series Floodlights are designed to provide years of reliable lighting performance However should the need for replacement parts arise they are available through your authorized Cooper Crouse Hinds Pauluhn distributor Assistan...

Отзывы: