108
www.cooperbussmann.com/wirelessresources
Cooper Bussmann 245U-E Wireless Ethernet Modem & Device Server User Manual
Rev Version 2.19
JPerf Application
Jperf is a graphical interface that runs over the top of Iperf. It will display a graph result from the Iperf test.
1. Open a command prompt and change to the jperf-2.0.2: directory and run the Jperf application, as shown in
Figure 104.
The command prompt screen will disappear and the Jperf screen will appear as seen in Figure 105.
Figure 104 Jperf
Figure 105 Jperf Screen
2. When the Jperf screen appears, select the Client option, and enter the IP address of the server PC. Leave the
Port as the default and click
Run Iperf
.
The test will run again and the bandwidth (throughput) display will show results of the test.
NOTE Jperf runs using Java technology. Depending on your PC setup, further installation of Java
software may be required.