8
Louver
1
Press
『
』
to start up the unit.
Press
『
』
to set louver direction.
Each press of the button will adjust
the direction as the following
sequence.
Options of louver setting may vary along with the types of indoor units. Please refer to the
manual of indoor unit for details.
When the louver is in operation, location display on LCD may not exactly match with the
actual location.
Sometimes the louver may not stop immediately after pressing the key.
Louver setting when connected with 3D panel
2
When
and is selected and flashing,
Press
『 』
and
vertical louver
swings or changes the angle at stop.
Each press of the button the vertical
louver will display in a flashing
manner as the following sequence.
Press
『
』
and vertical louver will
display in a reverse manner of the above
sequence.
When flashes for 10s, the blades
move and vertical louver starts to swing.
When other icons flash and stop after
10s, vertical louver stops at set location.
