Cooper & Hunter CH-S09FVX, Руководство по обслуживанию

Страница: 34 / 80

3
1
Installation and Maintenance
Service Manual
8.3 Installation Tips
1. Removing and Installing Front Pane
●Removal Method
(1) Slide until the 2 stoppers click into place
(2) Open the front panel forward and undo the string
(3) Remove the front panel
●Installation Method
(1) Attach the front grille and front panel after pulling the string around them.
(2) Close the front panel and slide until the stoppers click outside.
2. Removing and Installing Front Grille
●Removal Method
(1) Open the front panel.
(2) Remove the 4 screws and remove the front grille while pulling it
forward(3 tabs).
●Installation Method
(1) Secure the front grille with the 4 installation screws(3 tabs)
(2) Return the front panel to the original position.
3.How to Set the Different Addresses
When two indoor units are installed in one room, the two wireless remote controllers can be set for different addresses.
(1) Remove the front grille.
(2) Live the sensor securing plate and remove the front metal plate cover.
(3) Remove the electric box(1 screw).
(4) Remove the thermistor.
(5) Remove the side metal plate cover(7 tabs).
(6) Cut the address jumper(JA )on the printed circuit board.
8.4 Indoor Unit Installation
1.Refrigerant Piping
(1) Drill a hole ( 65mm in diameter ) in the spot indicated by the symbol in the illustration ad below .
Front panel
Open the front panel
Remove
front grille
Casing
Front
grille
Remove 4 screws
3 tabs
3 Remove 1 screw
4)Thermistor
5)Side metal plate cover
JA
JA
EXIST
CUT
1
2
ADRESS
2)Front metal plate cover
2)Sensor securing plate