2.
1.
3.
Replacement of batteries in
remote controller
4.
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
①
②
③
④
Lift the cover along the direction of arrow (as
shown in Fig 1
①
).
Take out the original batteries (as shown in F ig
1
②
).
Place two 7# (AAA 1.5V) dry batteries, and
make sure the position of “+” polar and “-”
polar is correct (as shown in Fig 2
③
).
Reinstall the cover (as shown in Fig 2
④
).
During operation, point the remote control signal
sender at the receiving window on indoor unit.
The distance between signal sender and receiving
window should be no more than 8m, and there
should be no obstacles between them.
Signal may be interfered easily in the room where
there is
À
uorescent lamp or wireless telephone;
remote controller should be close to indoor unit
during operation.
Replace new batteries of the same model when
replacement is required.
When you don
'
t use remote controller for a long time,
please take out the batteries.
If the display on remote controller is fuzzy or there
'
s
no display, please replace batteries.
NOTICE
WIFI Function
Press
“MODE” and “TURBO” button simultan-
eously to turn on or turn off WIFI function. When
WIFI function is turned on, the “ “ icon will
be displayed on remote controller; Long press
“MODE” and “TURBO” buttons simultaneously for
10s, remote controller will send WIFI reset code
and then the WIFI function will be
turned on. WIFI function is defaulted ON after
energization of the remote controller.
●
This function is only available for some models.
Double
Self Clean
function
●
●
This function is only available for some models.
The
auto
clean f
un
ct
ion
c
an
only
wor
k under normal
ambient t
emperatur
e. If the roo
m
is dus
t
y, clean it
on
c
e
a
month
;
i
f
no
t, clean
i
t
on
c
e
ever
y t
hree
month
s. Aft
er
t
he
auto
clean f
un
ct
ion
is t
urne
d
on,
y
ou
c
an
lea
ve
t
he
room
. W
hen
auto
clean
i
s f
ini
shed
,
the air conditioner will enter standby status.
NOTE
Under unit off status, hold "MODE" and "FAN"
buttons simultaneously for 5s to turn on or turn off
the auto clean function. When the auto clean func-
tion is turned on, indoor unit displays "CL" . During
the auto clean process of evaporator, the unit will
perform fast cooling or fast heating. There may be
some noise, which is the sound of flowing liquid or
thermal expansion or cold shrinkage. The air con-
ditioner may blow cool or warm air, which is a
normal phenomenon. During cleaning process,
please make sure the room is well ventilated to
avoid affecting the comfort.
