Cooper & Hunter CH-S07BKP6, Руководство пользователя

Страница: 26 / 54

18K:
2 4
Installation of outdoor unit
yellow-
green
Step three: connect indoor and outdoor pipes
1. Remove the screw on the right han-
dle of outdoor unit and then remove
the handle.
2. Remove the screw cap of valve and
aim the pipe joint at the bellmouth of
pipe.
3. Pretightening the union nut with
hand.
4. Tighten the union nut with torque
wrench by referring to the sheet
below.
handle
screw
gas pipe
liquid pipe
liquid
valve
gas valve
union nut
pipe joint
Hex nut diameter Tightening torque
(N.m)
Φ 6
Φ 9.52
Φ 12
Φ 16
Φ 19
30~40
45~55
60~65
70~75
15~20
1. Remove the wire clip; connect the power connection wire and signal control
wire (only for cooling and heating unit) to the wiring terminal according to the
handle
07
、
、
09K
、
12K 24K
Indoor unit connection
violet orange
yellow-
green
2 4 5 N(1)
blue black
Step four
N(1) 5 2 4 3
blue black brown violet
orange
yellow-
green
Indoor unit connection