Cooper & Hunter CH-S07BKP6, Руководство пользователя

Страница: 11 / 54

adsorbing the dusts and killing the bacteria in the room.
(10).
Setting air function
Press button until is displayed, then air function is turned on.
Press button until is disappeared, then air function is turned off.
When the indoor unit is connected with fresh air valve, air function setting can
control the connection of fresh air valve, which can control the fresh air volume and
improve the air quality inside the room.
(11).
Setting sleep function
In unit on status, press SLEEP button to turn on or turn off sleep
function.

When is displayed, sleep function is on.

When is not displayed, sleep function is off.
Notes:
①
.
Sleep function can not be set in auto and fan mode;
②
.
When turning off the unit or switching mode, sleep function is cancelled;
(12).
Setting I FEEL function
In unit on status, press I FEEL button to turn on or turn off I FEEL function.
When
is displayed, I FEEL function is on.
When is not displayed, I FEEL function is off.
When I FEEL function is turned on, the unit will adjust temperature according to the
temperature detected by the remote controller to achieve the best air-conditioning
effect. In this case, you should place the remote controller within the valid receiving
range.
(13).
Setting timer
You can set the operation time of unit as you need. You can also set timer on and
timer off in combination.
Before setting, check if the time of the system is the same as the current time. If not,
please set the time according to current time.
1). Setting timer off
①
.
Pressing TOFF button, “OFF” is blinking and time displaying zone displays the
timer time of last setting.
②
.
Press or button to adjust the timer time.
③
.
Press TOFF button again to confirm setting. OFF is displayed and time
displaying zone resumes to display current time.
9
Introduction for buttons on remote controller