Cooper & Hunter CH-HP07MNK, Инструкция по установке и эксплуатации

Страница: 28 / 35

26
Troubleshooting and extra information
6.1.Parameter list and breakdown table
Protect/fault
Reason Elimination methods
Fault
display
Standby Non
Normal boot
Inlet Temp Sensor Fault
The temp. Sensor is broken
or short circuit
Check or change the temp. Sensor
P01
Outlet Temp Sensor Fault
The temp. Sensor is broken
or short circuit
Check or change the temp. Sensor
P02
Syst1:Coil temp1 Sensor
The temp. Sensor is broken
or short circuit
P153
Syst1:Coil temp2 Sensor
The ambient temp. Sensor is
broken or short circuit
P154
AT Sensor Fault
P04
Syst1:Suction temp Sensor
P17
Syst1:Antifreeze Sensor1(US)
P191
Syst1:Antifreeze Sensor2(US)
P193
Syst1:Antifreeze Sensor4(HSS) P195
Syst1:Inlet Sensor(EVI) P101
Syst1:Outlet Sensor(EVI) P102
Syst1:Exhaust temp Sensor P181
Syst1:Pressure Sensor fault
PP11
Water Tank Temp Sensor P03
Syst2:Coil temp Sensor
P25
Syst2:Suction temp Sensor
P27
Syst2:Antifreeze Sensor1(US)
P291
Syst2:Antifreeze Sensor2(US)
P293
Syst2:Antifreeze Sensor1(HSS)
P292
Syst2:Antifreeze Sensor2(HSS) P296
Syst2:Exhaust Temp Sensor P281
Syst2:Pressure Sensor fault PP21
Syst2:Inlet Sensor(EVI) P201
Syst2:Outlet Sensor(EVI)
P202
Syst1:Exhaust Overtemp
P182
Syst2:Exhaust Overtemp
P282
Low AT Protection TP
Non
Check or change the temp. Sensor
Check or change the temp. Sensor
Check or change the temp. Sensor
Check or change the temp. Sensor
The temp. Sensor is broken
or short circuit
The temp. Sensor is broken
or short circuit
The temp. Sensor is broken
or short circuit
Check or change the temp. Sensor
The temp. Sensor is broken
or short circuit
The temp. Sensor is broken
or short circuit
The temp. Sensor is broken
or short circuit
The temp. Sensor is broken
or short circuit
The temp. Sensor is broken
or short circuit
The temp. Sensor is broken
or short circuit
The system 1 pressure Sensor
is broken or short circuit
The temp. Sensor is broken
or short circuit
The temp. Sensor is broken
or short circuit
The temp. Sensor is broken
or short circuit
The temp. Sensor is broken
or short circuit
The temp. Sensor is broken
or short circuit
The temp. Sensor is broken
or short circuit
The temp. Sensor is broken
or short circuit
The temp. Sensor is broken
or short circuit
The temp. Sensor is broken
or short circuit
The temp. Sensor is broken
or short circuit
The temp. Sensor is broken
or short circuit
Check or change the temp. Sensor
Check or change the temp. Sensor
Check or change the temp. Sensor
Check or change the temp. Sensor
Check or change the temp. Sensor
Check or change the temp. Sensor
Check or change the pressure Sensor
or pressure
Check or change the temp. Sensor
Check or change the temp. Sensor
Check or change the temp. Sensor
Check or change the temp. Sensor
Check or change the temp. Sensor
Check or change the temp. Sensor
Check or change the temp. Sensor
Check or change the temp. Sensor
Check or change the temp. Sensor
Check or change the temp. Sensor
Check or change the temp. Sensor
The system 2 pressure Sensor
is broken or short circuit
Check or change the pressure Sensor
or pressure
The ambient temp. is low
Fan Motor1 Fault
Fan Motor2 Fault
F031
F032
1. Motor is in locked-rotor state
2.The wire connection between
DC-fan motor module and fan
motor is in bad contact
1. Motor is in locked-rotor state
2.The wire connection between
DC-fan motor module and fan
motor is in bad contact
1.Change a new fan motor
2.Check the wire connection and make sure
they are in good contact
1.Change a new fan motor
2.Check the wire connection and make sure
they are in good contact
Communication Fault
(speed control module)
E081
Speed control module and main
board communication fail
Check the communication connection
Electronic control fault table
Can be judged according to the remote controller failure code and troubleshooting