Cooper & Hunter CH-HP07MNK, Инструкция по установке и эксплуатации

Страница: 14 / 35

12
4.2.Transit
When the unit need to be hung up during installation, a 8
meters cable is needed, and there must be soft material
between the cable and the unit to prevent damage to the
heat pump cabinet. (See picture 1)
WARNING
DO NOT touch the heat exchanger of the heat
pump with fingers or other objects ！
Picture 1
When the heat pump is transported please keep the unit
stand up. The unit cannot be laid down, otherwise the
inner parts of the device may be damaged.
There must be enough space around the unit for maintenance.
The place is free from heat radiation and other fire flame.
There must be not obstacles near the air inlet and outlet of the heat pump.
There must be water channel around the heat pump to drain the condensing water .
A place which is free from strong air blowing.
The location must have good ventilation.
The unit can be installed on any place outdoor which can carry heavy machine such as
terrace, housetop, ground and so on.
A pall is needed in winter to protect the heat pump from snow.
4.3.Installation occasions
Or please use forklift, since there is wood chassis as package.
Installation