Other Instructions
1. Alarm Warning
If the water bucket is full or the water bucket hasn't been put on the correct
position for 3mins, the buzzer will give out sound for 10s for reminding you to
empty the water bucket or re-install the water bucket at correct position.
2. Auto Stop
When bucket is full, remove the unit or not placed the unit correctly or the
humidity is 1
0
% lower than the set humidity, the unit will stop operation
automatically.
3. Memory Function
If power failure, all settings will be memorized. After power recovery, the unit
will resume operate according to the memorized settings.
4. Bucket full light
This indicates that bucket is full or removed or not placed correctly.
5. Filter reset
When the indicator of filter clean is on, it needs to clean filter. After filter is
cleaned, press Fan button and Humidity button simultaneously and then the
indicator of filter clean will be off.
Press Mode button and Timer button simultaneously for 1s to enter into child
lock protection. After pressing any button, LC will be displayed to indicate
buttons are locked. Press Mode button and Timer button simultaneously for
1s again to release shielding function.
6. Child lock function
8
