Cooper & Hunter CH-3040, Инструкция по эксплуатации

Страница: 9 / 20

7. CLEANING AND MAINTENANCE OF THE UNIT
IMPORTANT!
Always switch off and unplug the unit before
cleaning
We recommend the following:
1) Use cold boiled water or distilled water.
2) Clean the transducer, water tank and basin unit every week.
3) Change the water in water tank more often to keep it fresh.
4) Make sure to pull out the water from the water tank and dry the water
basin before you store the unit unused for a long period of time.
5) Clean the whole unit and make sure that all parts of the unit are
dried completely before unused for longer period of time.
How to clean the transducer:
1) Put 5-10 drops of cleaning abluent on the surface of the transducer,
wait for 2-5 minutes.
2) Brush off the scale from the surface.
3) Rinse the transducer with clean water.
4) Never use sharp or solid objects for cleaning the transducer.
How to clean the basin unit:
1) Clean the water basin with soft cloth .if there is excess film on
the surfaces, then soak the cloth with vinegar and repeat the
process.
2) If there is a film in any of the depressions along the basin ,drop a
bit of vinegar into depression and clean it out with a brush.
3) Rinse the water basin with clean water.
Failure to comply with the rules of the section
“Cleaning and servicing the device” can lead to the
development of micro-organisms, bacteria inside the
pan. That will lead to unpleasant smells and violation
of hygienic norms.
Use as much as possible pure water! Water often
contains calcium salts, rust particles and other chemical
elements. Such elements are able to settle on the internal
surfaces of the device, which can lead to breakdown or
difficulties during routine maintenance of the instrument.
IMPORTANT!
If your water is hard, containing high concentrations of calcium and other
minerals, then over a period of time white dust will start to deposit on
the various surfaces in the room. A white, film-like substance will also
start to develop in the water basin, on the transducer and on the
inner surface of the water tank. This white film will impede the proper
function of the transducer and the operation of the machine.
7
You can ensure many years of trouble free operation of your humidifier
by following a few simple maintenance procedures.
Never run the unit when there is no water in water basin
IMPORTANT!
5. Insert the power cord into the socket, and use the buttons on the front
panel to operate the device.
The functions and meanings of the buttons can be found in the “Control of
the device” section.
When moving the humidifier, always hold the device by
the base (Fig. 1), in order to avoid the fall of the part of
the device, with the main electronic components. If there
is water in the device, in order to avoid its entry into the
electronic units through the air outlet (Fig. 2), keep it
horizontal.
IMPORTANT!