Igniting the burners
Before switching on a hob burner, make sure that the selector knob you are using corresponds to the
burner you wish to switch on (Figures 6 and 7). To ignite a burner press and turn the corresponding contol
knob clockwise until the high flame position is reached. Press the bottom part of the Ignition and Light
button (Figure 6) until the burner ignites.
Adjusting the flame
Adjust the flame size by turning the control knob (Figure 8). Use the appropriate level of flame for the type
of cooking you are doing and use suitable sizes of pan for the different burners.
The size of the flame should only be regulated within the range between and (Figure 8).
Turning off the burners
To turn off the burner, turn the control knob anti-bclockwise to the position.
Burners supplied from an LPG cylinder
Before lighting the first burner, open the valve on the LPG cylinder. Then light the burner using the method
described above.
When closing the flow of gas, before turning off the last burner close the valve on the LPG cylinder. When
the flame has gone out, close the tap of that burner.
When the hob is not in use the valve of the LPG cylinder should be closed.
9
Using the hob
Cooker controls
Before using your cooker for the first time:
Read the operating and safety instructions thoroughly.
If you have not already done so, follow the steps in the “Preparation” section on page 6 so that the cooker
is ready for use.
Figure 7 -burner controls
Figure 8 - hob control knob
1
4
3
2
1
2
3
4
Figure 6 - Control Panel
LOW
FLAME
HIGH
FLAME
IGNITION
AND LIGHT
BUTTON
OVEN/GRILL
CONTROL
KNOB
FRONT LEFT
HOB BURNER
BACK LEFT
HOB BURNER
FRONT RIGHT
HOB BURNER
BACK RIGHT
HOB BURNER
