16
Cleaning the glass oven door
Ensure the oven door is cool before cleaning. Removal of the
door makes it easier to clean the door, the door surround and
the seals.
To remove the door proceed as follows:
1.
Open the door fully.
2.
Raise one hinge clip and rotate it towards you as far as the
stop (Figure 20). Repeat the procedure with the second
hinge clip on the other side of the door.
3.
Raise the door gently until it comes to rest against the hinge
clips.
4.
Grip the edges of the door and lift the door clear of the
catches in the hinge openings.
5.
When cleaning the door, take care not to move the clips from their position.
6.
Once cleaning is complete, lift the door and slide the hinges into the hinge openings.
7.
Engage the slots on the hinges with the catches in the hinge openings.
8.
Check that the weight of the door is fully supported on the hinges.
9.
Lower the door and raise the hinge clips, then return them away from you and back to their starting
positions.
10. Check that the seal is in place then close the door. Make sure that the inner face of the door meets and
shuts against the seal all around.
HINGE CLIP
STOP
CATCH
SLOT
HINGE
OPENING
Figure 20 - removing the oven door
Changing the oven lamp
Wait for the oven to cool.
Unscrew and remove the diffuser. Unscrew the lamp from the lampholder. Replace lamp and diffuser
(Figure 20).
The replacement lamp must be of the same type, voltage and wattage (15W SES 300°C).
LAMP
LAMPHOLDER
DIFFUSER
Figure 21 - changing the lamp
