Page 5
Fitting the door facia panel
1. Fit the door facia clips (with the door height adjuster screw at the top) into the holes provided in the
door (Figure 6).
2. Fit the plain door clips to the bottom of the door with two screws (Figure 7).
3. Make sure ALL door adjusters are set in the middle position. To centre an adjuster, turn the adjuster
screw with a screwdriver (Figure 8).
4. Screw the door facia panel to the door clips (using the 12mm countersunk screws) so it is level with the
top of the hinges (Figure 9). Secure the door facia panel to the bottom plain door clips.
FIGURE 6
DOOR
FACIA
CLIP
2 x 18mm
CHEESEHEAD
SELF-TAPPER SCREWS
DOOR
HEIGHT
ADJUSTER
SCREW
FIGURE 7
PLAIN
DOOR
FACIA CLIP
SCREWS
FIGURE 8
SCREWDRIVER
DOOR CLIP
ADJUSTER
ADJUSTER
SCREW
FIGURE 9
DOOR
FACIA
PANEL
SCREWS
Adjuster must be in the middle to align with the
other two holes.
