Page 3
Check the contents
Installation options
Important
Make sure that the voltage marked on the rating label on the product corresponds with the voltage in your
home.
This quality product has been tested and certified to meet all applicable UK electrical and safety standards.
The appliance should be installed on a flat, level and solid surface.
Position the appliance away from direct heat sources or direct sunlight.
Allow adequate clearance around the appliance for adequate ventilation.
Never install the appliance in a room where the ambient temperature reaches below zero degrees. This will
affect the operation of the fridge.
The fridge can be installed as a stand alone appliance or partnered with the freezer (CZ51038IFZ).
Note: If you plan to install the fridge and the freezer side-by-side, one of the doors on one of the appliances
must be reversed to facilitate opening.
FIGURE 1
FIGURE 2
Figure 1 shows the dimensions and installation of
fridge or freezer appliance to be installed between
kitchen units.
Figure 2 shows the dimensions and installation
when partnering of both fridge and freezer between
kitchen units.
Check the following contents are included with the product and and inspect the casing for any damage. If
there is any need, contact your retailer from whom you purchased the product.
Installation kit
1x unit complete with fitted door and hinges
1x pair white cabinet brackets
1 x pack of 22 x 12mm self tapping screws
2 x spacer brackets
1 x pack of facia door clips with 4 counter sunk
12mm self-tapping screws.
4x cheesehead 18mm self-tapping screws
Fridge
1 x split shelf (2 parts)
2 x glass shelves
2 x crisper containers
Cleaning tip
2 x balcony shelves (in door)
2 x egg trays
