CoolSky Apricus Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 68

CoolSky Apricus Скачать руководство пользователя страница 35

35

An adjustable frame kit designed and
provided by Apricus is capable of turning the
standard frame into a rack, in order to
position the manifold and tubes at the ideal
azimuth and tilt for almost any location.

Frame Material

All frame components are made of 439
grade stainless steel making the frame both
strong and corrosion resistant. It is
important that frame attachment points and
externally supplied fasteners are also of
suitable structural strength and corrosion
resistance.

Galvanic Reactions

Zinc galvanized steel roofing or Uni-strut
must NOT directly contact stainless steel as
galvanic reaction between the two metals
can cause premature oxidation of the zinc
coating and the metal underneath. Apricus
offers rubber pads which are perfect for
separating the metals (see image below).

Fasteners

It is recommended that stainless steel
fasteners are used. If using galvanized steel
bolts, separate dissimilar metals using a
nylon or high density EPDM/Silicone rubber

washer.

Manifold and Bottom Support Track
Assembly

The Manifold and Bottom Track are secured
to the standard frame channels using special
securing plates. These plates are attached to
the frame channels before they leave the
factory.

They only need to be LOOSENED in order to
allow enough movement to fit the Manifold
and Bottom Support Track in place. The
plates are designed so that while somewhat
loose, they enable the Manifold and Bottom
Support Track to slide left and right for
positioning and allow the standard frame
channels to be easily adjusted side to side to
suit the roof framing layout.

Manifold Attachment

Bottom Support Rail

Attachment

«
...
33
34
35
36
37
...
»

Содержание Apricus





































































Отзывы:

Нет отзывов