The mounting bracket allows for a flat surface and pole mounting.
When mounting to a flat surface, secure using a minimum of
2x M10 bolts. When mounting to a pole use a
U-Bolt Pole Mounting Clamp Kit.
MOUNTING
NOTE:
In order to adjust bracket angle the bracket armlock
teeth must be separated completely from the housing.
6mm
Butch LED Floodlight
75W / 150W
Butch LED Floodlight
240W
120°
120°
0°
Mounting to comply with Dark Sky (DS43)
When mounting to comply
with Dark Sky (DS43)
BLF-150-WWT-T4-MP
or
BLF-240-WWT-T4-MP
ensure the luminaire is
mounted horizontally
Page 2 / 2
aus.
1300 287 533 •
intl.
+613 8681 3633 • www.coolon.com.au
As a matter of continual improvement, the requirements and recommendations in our manuals evolve to reflect new industry requirements and the latest feedback from the field.
The Coolon team is working hard to ensure optimal product operation and the safety of all users, please check our website periodically to ensure you are up to date with the latest information.
Product must be installed by a suitably qualified person. All documentation is subject to change without notice.
www.coolon.com.au
IMPORTANT
• Read through this manual before installation
• Handle the product with care
• Class I products must be grounded
• The product must be installed by a suitably qualified person
• Do not stare at operating lamp, may be harmful to the eyes
• Turn OFF the power before installation and maintenance
• Make sure the product is securely installed
• The housing might become hot after operation
• Keep optical face clean
Primary use:
commercial and industrial applications.
Page 2 / 2
BUTCH INDUSTRIAL LED
MANUAL
EDITION 1.2
186°
156°
0°
