1. Function Description
This MicroATX power supply is designed for personal computer. There are five
DC outputs: +5V, +12V, -12V, +3.3V
+5V
, and it provides power to all
computer systems and peripherals with maximum protection.
Here are some of the key features:
＆
SB
S-ATA ready
Fully supports all Intel & AMD system demands
20-24Pin/4-8Pin adators available for both 20pin and 24pin
motherboards
Tube- tide design to tidy wires
All kinds of protection circuits (OVP/OPP/SCP)
Anti-corrosive nickel plated chassis
It is rather simple to install this power supply to your precious computer
tower. Follow the steps below to finish the setup.
Step1:Open the computer tower cover; put the power supply into the
corresponding location of the tower, and then use right screws to fix the
power supply to tower.
Step2:Put the Main Power Connector, ATX12V Connector, S-ATA Connector,
Peripheral Connectors and Floppy Connectors to the corresponding male
connectors of main-board, peripheral devices (i.e. HDD, CDROM etc.)
and floppy drivers respectively. When you connect the connectors, please
pay attention to the orientation of them because of the different hole sizes.
Find the proper orientation and push down firmly making sure that the
pins are aligned.
2. How to Setup
1
3. Specifications
3.1 Input Requirements
The power supply shall operate as below:
Содержание CM-300
Страница 1: ...Table of Content 1 1 3 3 4 1 ...
