EN
41
2. Press the
key. This activates the Timer Off program. The
control light lights up now. 0.0 appears in the display.
You can define when the appliance is to be switched off automatically by pressing the
keys. The deactivation
is set back by 30 minutes each time you press the key (from 10 hours to 60 minutes). For example, the display 9.5
means that the appliance will be switched off automatically after 9 hours and 30 minutes. Wait for 5 seconds after
defining the desired time, or press the
key again to save the time. The set temperature is automatically reset in
the display window and the
control light lights up indicating that the program is set. The procedure to be followed
to activate the function is identical to the one described above. The Start/Stop time can be set in the 30 minutes to
24 hours range.
3. Both control lights light up till the automatic Start/Stop time is reached, if you set the start as well as stop times.
IN THE CooL moDE
The appliance is switched off automatically as soon as the display shows “P1”. This is a protective function that prevents
the water from flowing into the appliance. The indoor water tank is full. You have two options of guiding the water out of
the appliance now:
WATER DISCHARGE
Note
If the relative humidity is less than 80%, no water drainage is required during cooling. If you perform the water
drainage procedure as outlined above during cooling operation, the cooling performance will be reduced.
Содержание MPM3-10CRN1
Страница 25: ...50 ...
