THERMOSTAT OPERATION & SPECIFICATION DATA
OFF mode switch position
COOL mode switch position
FAN mode switch position
HEAT mode switch position
Temperature set button (increasing)
Temperature set button (decreasing)
LOW fan speed switch position
MEDIUM fan speed switch position
HIGH fan speed switch position
FUNCTION
SYMBOL
OPERATING INSTRUCTIONS
COOLING MODE
- Position the switch S1 to COOL mode function.
- Set desired temperature setting by pressing the (+) or (-) button to increase or decrease the set
value displayed on the LCD of the thermostat .
- Fan speeds can be selected by positioning the switch S2 to:
LOW speed
MEDIUM speed
HIGH speed
FUNCTION
SWITCH POSITION
OPERATING PROCEDURE
HEATING MODE
- Position the switch S1 to HEAT mode function.
- Set desired temperature setting by pressing the (+) or (-) button to increase or decrease the set
value displayed on the LCD of the thermostat .
- Fan speeds can be selected by positioning the switch S2 to:
LOW speed
MEDIUM speed
HIGH speed
FAN MODE
- Position the switch S1 to FAN mode function.
- Fan speeds can be selected by positioning the switch S2 to:
LOW speed
MEDIUM speed
HIGH speed
UNIT OFF
- Position the switch S1 to OFF position to turn off the unit.
Notes:
1. Start-up display: When power is supplied to the thermostat, the LCD indicates a flashing display of the standard set point value. Press the (+) & (-) button at the same
time to change the display to ambient temperature.
2. Set point adjustment: When the (+) or (-) button is pressed, the thermostat assumes the temperature set point setting mode and the present set point is displayed. The
displayed set point can now be adjusted in 0.5K steps to the required value. After 3 seconds (approx.) the actual temperature will then be displayed.
+
-
+
-
°C
+
-
-
+
10
