[email protected] www.CoolGear.com
•
DC Jack Power connector:
A DC5V / 2A AC adapter is supplied with this product.
•
RJ Ethernet Connector:
10 / 100Mbps Ethernet port. It supports auto cross-over feature. You can use the same
cable to connect to a Hub, Switch or a host computer.
•
Led Indicators:
The data gateway’s top panel has a heartbeat LED and its rear panel has 4 LAN LED’s. They are
described as the following table:
LED Name
Color
LED Function
Heartbeat
Green
Blinking: Normal operation
Else: Malfunction
Link/Act 100
Green
Steady on: Linked in 100Mbps mode.
Blinking: Transferring data
Link/Act 10
Green
Steady on: Linked in 10Mbps mode.
Blinking: Transferring data
LAN TX
Green
Blinking: Sending data out to LAN port
LAN RX
Green
Blinking: Receiving data from LAN port
Hardware Installation
1.
Use static electricity discharge precautions.
Remove possible static discharge potential from any objects that
the data gateway may come in contact with before installation. This can be accomplished by touching a bare
metal chassis rail after you have turned off the power.
2.
Attached the power adapter.
Link / ACT100 LED
Link / ACT10 LED
LAN TX LED
LAN RX LED
Aux Power
Input
LED’s
RJ45 LAN
DC Jack
