10-Port Managed USB3.2 Gen 1 Metal Hub with DIN RAIL Mounting Kit
2
1.
USB-A Downstream Facing Port Connectors:
There are 10 USB-A
connectors for standard USB3.2 Gen 1 and legacy USB2.0/1.1
devices.
Note 1:
The last USB port (Port 10) of this hub does NOT
support USB2.0/1.1 devices because it is used to
communicate with the managing utilities. However, it still
supports USB3.2 Gen 1 devices.
2.
USB-B Upstream Facing Port Connector:
The Type-B connector
from upstream USB3.2 Gen 1 port. It is connected from host or
anot
her USB3.2 hub’s downstream facing port.
3.
Power LED:
Turns on indicates the hub was powered.
4.
Port State Indicator LEDs:
Each port has a LED next to it. When the
LED is on, the USB device is enabled (connected). If the LED is off, the
USB device is disabled (disconnected).
5.
Self Power Input Connector:
This 2-pin (one pin is for the positive
voltage and the other pin is GND) terminal blocks is used to connect
2. Connector Layout
Power LED
10 USB-A Downstream Ports
USB-B Upstream
Port Connector
Power Input
Connector
10 Port On/Off State LED Indicators
