42
Additional Information
USB Server Device Status LEDs
The LEDs indicate the status on the USB server device.
“PWR” (Power/Ready) LED:
The “
PWR
” (Power/Ready) red LED indicates the AnyplaceUSB-S4 is working fine and
booted properly.
USB Port Status LEDs:
The USB Port LEDs indicate the USB ports status, the
green
LED is on, when your USB
devices have connected to the USB ports successfully.
Ethernet Status LED’s:
The “
Speed
”
green LED (Ethernet Speed) indicates speed of Ethernet connection .
Steady on: The device is connected to a 100M Ethernet connection.
Steady off: The device is connected to a 10M Ethernet connection.
The “
Link
” yellow
LED indicates Ethernet is linked.
Steady on: The Ethernet link has established.
Steady off: The Ethernet cable is disconnection.
Blinking: Ethernet data transmission is occurring.
The Ethernet Link LEDs will flash when Ethernet data is transmitted or received.
Note
: The older 10 Mbit/s Ethernet is not a good base for USB server device support.
