Cooler Master UCP 700W, Руководство пользователя

Страница: 8 / 85

3. Installation
1. Switch off the main switch of the power supply and disconnect the
power cord.
2. Unscrew and open the side panel of the chassis.
3. Disconnect all power connectors from the motherboard and from
peripheral devices such as case fans, hard drives, CD-ROMs, floppy
drives, etc.
4. Replace the power supply.
5. Connect P1 (24Pin) and P2,P3 (CPU 4+4Pin) connectors to your
motherboard.
6. Connect other connectors to your system components.
7. Make sure that all other connectors are also connected.
8. Close the chassis and reattach the case screws.
9. Plug in the power cord of the power supply.
If your system does not turn on after installing the power supply,
follow the troubleshooting guide as listed below:
4
4. Troubleshooting
1. Please make sure the main power is connected on correctly.
2. Please make sure the P1 and P2 connectors are connected correctly to
the motherboard.
3. If the power supply does not work properly, please contact our service
center immediately.
User Manual / English