Copyright 2015 © Cooler Master Corporation. All Rights Reserved.
22
Sensor Setting
DPI Settings
Choose which DPI level you want to set the DPI.
Slide the bar right to increase the mouse sensitivity. The DPI
can be set from 50 to 6400 DPI with 50 DPI per step.
*The further the tab is to the right, the faster the mouse cursor
will move.
The X and Y axis can be adjusted independently by clicking
the lock icon. : Lock X&Y axis : Unlock X&Y axis
Lift Off Distance (LOD) Settings
There are five LOD levels.
The LOD of sensor can be set from Low(1) to High(5).
You can slide the bar right to increase the sensor LOD.
Mouse DPI and Sensor Setting
2
3
1
2
3
1
Angle Tuning
There are twelve levels to set the angle of the sensor.
The angle tune ranges from -30
°
to +30
°
with steps of 5
°
.
You can slide the bar right to increase the rotated angle of the
sensor.
Angle Snapping
There are ten levels of angle snapping.
The angle snapping can be set from Low(1) to High(5).
You can slide the bar right to decrease the motion data output
of Y-axis
0
9
1
5
30°
-30°
