Centurion B540/B541
English
5
1. Install the CD-ROM. and FDD into
the 5.25” and 3.5” slot respectively.
2. Locate the HDD device in place,
and align its screw holes with the
rack’s.
3. Push forward the plastic handling
and tightening it.
4. Push the lock and the installation is
done.
Installing the Power Device
1
3
2
1. Place the power device on the rack
with the cable part facing forward.
2. Secure the power device with
screws.
3. Close the casing by locking the side
panel with two screws to complete
the installation.
Replacing/Installing Fans
2
3
1
2
3
Replacing/Installing the front fan
1. Remove the side and front
panel
2. Remove the fan screws on the
front and displace the fan.
3. Replace with the new fan and
secure it with screws. The
replacement is completed.
Replacing/ Installing rear fans
1. Remove the side panel.
2. Remove the fan screws on the
rear and displace the fan.
3. Replace with new fans and
secure them with screws. The
replacement is completed.
