Centurion 532
English
CS-8
006-
02 R
EV
01
1. Take out the HDD rail from the
package. Install it on the HDD
and have the screw holes
aligned.
2. Insert the assembled HDD into
the hardware rack.
Installing the power devices
1.
Remove side casing.
2. Place the power supply on the
power rack with the wiring end
facing forward and connect it to
the back of the casing.
3.
Secure the power supply device
with screws.
4.
Assemble the side casing and
the installation is done.
Replacing/Installing the Case Fan
5
Change the Front Fan
1. Remove the side casing.
2. Loosen the lower and side screws
to remove the HDD bracket.
3. Loosen the fan screws from the
front casing, and then remove the
fan.
4. Install the new fan and secure it
with screws. Continue to put it back
on the HDD rack and secure it with
screws.
Change the Rear Fan
1. Loosen the fan screws from the
rear casing and remove the fan.
2.
Install the new fan and secure it with
screws.