B Part
C brief instruction
1. Connect to device
Connect the OBD cable to the OBD interface in the car, and the other end is inserted into the OBD
port
⑨
of HUD device.
2. Turn on the power
Fix the HUD device on the sun visor by using clip
⑤
, and then switch the power key
⑦
to turn on
the power.
3. Place the imaging glass
Insert the imaging glass into the base, and then place the base on the dashboard table in front of
the driver. Adjust the angle so that you can see the HUD screen through the glass under normal
sitting position. Record the current position, peel off the 3M protective film on the base, stick the
base to the position, and then fine-tune the glass angle.
When the power is turned on, the default display information of the HUD screen includes speed,
rotating speed, fuel consumption, water temperature, date, time and so on.
4. Connect APP
