manualshive.com logo in svg

Cool Space CS5-16 Series, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
Cool Space CS5-16 Series Скачать руководство пользователя страница 14

12

4.)

 

Remove pump from water sump and install new pump.  Reverse the above 

procedures to reconnect the wiring, lift pump bracket and reconnect the hose.  Secure 

wires to fan frame with wire ties to clear the fan blades. 

5.)

 

Reinstall cooling pads and guards, reconnect power and test pump. 

6.3 Technical support: 

Technical support and service is available directly from your distributor or COOL-

SPACE

® 

Technical Support Hot Line at 1-800-557-5716. 

7.0 Warranty: 

Under normal use, the Warranty covers (12) twelve months on the pump and (24) twenty-

four months from date of invoice for the remaining components. Refer to the 

manufacturer’s Warranty Policy for details.  

7.1 Warranty Form: 

Fill out and return to manufacturer.  Supplied with unit. 

7.2 Warranty parts: 

Warranty replacement parts are available through your local Distributor or Supplier 

where you purchased your COOL-SPACE

®

 unit.  If you have any questions or concerns, 

please contact us direct at 1-800-557-5716 or at [email protected].  Please have your 

model number

 and 

serial number

 ready. 

DO NOT DISCARD FAULTY PARTS!  THEY WILL NEED TO BE RETURNED 

FOR WARRANTY CREDIT. 

7.3 Optional accessories: 

Accessories are available from your local Distributor or Supplier or can be found online 

at www.COOL-SPACE.com. 

Содержание CS5-16 Series

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды