3
2
Panel
Features
Before you begin to play through your amp, it is very important to ensure the product has the proper AC line voltage
supplied. You can find the proper voltage for your amp printed next to the IEC line (power) cord on the rear panel of the
unit.
F
eature is located on the rear panel as well and is also explained in this section. Each product feature is numbered.
Refer to the front and rear panel diagrams in this manual to locate the particular features next to their number.
Please read this guide carefully to ensure your personal safety as well as the safety of your amplifier.
Unique-15G/25R Functions
New
unique
amp
offers
unique
tone
and
quanlity
:
.
•
Normal and Drive channels for clean and overdriven settings.
•
Compact size ideal for rehearsal and backstage warm-up.
•
Headphones jack for private listening or output to sound equipment.
•
AUX IN - RCA input jacks for
private
listening
or
output
to
sound equipment
.
1. INPUT-
Connect
your
guitar
2. NORMAL VOLUME - Adjust the
volume
of the normal channel.
3. GAIN - Adjust the amount of gain and overdrive in the drive channel.
4. DRIVE SELECT - Activate the drive channel.
5. DRIVE VOLUME - Adjust the
volume
of the drive channel.
6. DRIVE CHANNEL INDICATOR -(25R models only)
Light on when the drive channel is avaliable.
7. TREBLE - Adjust the high-frequency level.
8. MIDDLE - Adjust the middle-frequency level.
9. BASS - Adjust the low-frequency level.
10. REVERB (Unique 15R and 25R models only)-Adjust the reverb effect level for both channels.
1
2
3
4
5
6
7
8
9
10
11 12 13
14 15
Thank you for selecting the Unique series Guitar amplifier. Once again
‚
our engineers and artists have listened to
electric guitar players and put excellent features and sound in one
amplifier
.
The new Unique-15G/25R Series Guitar amplifiers deliver awesome sound reproduction for all of your electric guitar
sounds—from thundering bass to crystal highs—it’s all there!
11. AUX IN
- RCA input jacks for us
ing
with a portable CD or tape player, drum machine, etc. These input jacks
are
not affected by the amplifier’s volume or tone controls. Adjust the signal at the source.
12. FOOTSWITCH -(25R models only) Connect the footswitch (optional) at this jack for remote channel
switching capability. The gain select switch must be OUT for the footswitch to operate properly.
13.HEADPHONES - Output jack for standard stereo or mono headphones. Using this jack automatically
disconnects the speaker. This jack can also be used as an unbalanced line output by using either a stereo or
mono
1/4” phone plug connection.
14.POWER INDICATOR - Illuminate when the unit is ON.
15.POWER SWITCH - This switch turns the unit ON and OFF.
Unique-15G
Unique-25R
POWER REQUIREMENTS
38W
75W
INPUT IMPEDANCE
>1M
Ω
>1M
Ω
POWER OUTPUT
15W R.M.S.
25W R.M.S.
RATED LOAD IMPEDANCE
8
Ω
8
Ω
SPEAKER COMPLEMENT One 8
Ω
Special Design speaker
One 8
Ω
Special Design, 10" Speaker
