Cool Energy EcoStore CE-ES200, Руководство пользователя

Страница: 37 / 52

Heat pump water heater
EN
37 | P a g e
5.7 Air circuit supply
Maintenance operations only include the cleaning of the evaporator, when needed or at the end of
each shift, when checking the protective anode.
WARNING: Danger of injuries due to the presence of sharp edge blades. The
blades must not be deformed or damaged
– (comb blades of the condenser).
5.8 Descaling and limestone deposit removal
(periodic)
Since almost anywhere deposits of limestone can be formed, verify the infiltrations of dirty water and
for hygienic motives, the inside tank should be controlled and checked by a qualified person at least
after the first 2 years of use, but however when the production of hot water decreases.
The limestone deposits reduce the tank volume, so also the transmission capacity of the heat
exchanger and the production of hot water are reduced.
Maintenance must be done by qualified personnel.
For an accurate and competent maintenance of the inner tank it is necessary to have free access to the
flange in order to control and clean the inner tank.
5.9 Anode verification
(periodic)
The device is protected against corrosion by an electronic anticorrosion anode for protection against
the effects of spurious currents that could damage it.
The control is performed
without clearing out the tank.
L1 Blue L2 Green Signaling
OFF OFF Not powered device
ON/lightening ON/lightening Working device / right protection
lightening lightening Short circuit electrode (simultaneous lightening)
lightening lightening Disconnected electrode / no water (alternate lightening