COOL BOSS CB-16H Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 40

COOL BOSS CB-16H Скачать руководство пользователя страница 30

Cool Boss Evaporative Air Cooler

30

P/N 5900271 — June 2022 — Rev. A4

To test the GFCI incorporated into the Cool Boss Power Cord:

Plug the cord into a properly grounded wall outlet. The indicator should be illuminated. Refer to the

figure below.

a.

If not, check the wall outlet for power.

b.

If power is present at the outlet, the Power Cord or the GFCI is defective and requires

replacement.

Press the small Test button. The Indicator should go out and no power should be available at the

Cool Boss.

Press the Reset Button and the Indicator should be illuminated again. The Cool Boss should now
be provided power and is ready for use.

If the GFCI does not function, take the unit out of service, contact your dealer or Cool Boss

Support at

coolboss.com/support

, via email at

[email protected]

, or by phone at

(800) 253-2363

.

⚠

WARNING

Do not use the Cool Boss if the GFCI fails this test.

⚠

WARNING

The GFCI does not protect against electrical shock due to contact with both circuit
conductors or a fault in the wiring supplying the GFCI.

⚠

WARNING

Do not operate your Cooler if you find maintenance issues; instead, remove it from
service, then Assistance with your Evaporative Cooler is available from your dealer,

by calling Cool Boss at

(805) 933-9970

, or by emailing

[email protected]

. You may also contact Cool Boss for parts

replacement (please have the serial number and model number of your unit
available).

To store the Cool Boss

:

1. Drain the Reservoir and wipe clean and dry.
2. Secure the electrical cord.
3. Cover the Cool Boss Cooler to prevent dust build-up and store in a dry, protected area.

«
...
28
29
30
31
32
...
»

Содержание CB-16H









































Отзывы:

Нет отзывов