COOL BOSS CB-16, Инструкция по установке и эксплуатации, Страница: 19 / 40

Cool Boss Evaporative Air Cooler
19
P/N 5900271 — January 2023 — Rev. A5
Find a location for your Cool Boss
Find a suitable location for the Cool Boss (hot air to the rear, cooling area to the front). The Cool Boss
should be indoors, near an appropriate power and water source, and in a low-traffic and well-
ventilated area.
⚠
WARNING
T
his equipment has internal arcing or sparking parts that should not be exposed to
flammable vapors. The unit must not be located in a recessed area or below floor level.
⚠
WARNING Verify the floor will support the weight of the Cool Boss with a
full
reservoir; is well
constructed and stable enough to prevent the Cooler from tipping over
.
To choose a location for the Cool Boss Cooler:
Unlock the Casters to roll the Cool Boss. Direct the Fan outlet toward the area to be cooled.
⚠
CAUTION
To ensure efficient operation, the Cool Boss requires adequate air flow for intake
and exhaust. Verify a window or door is open.
Keep 36" / 914 mm minimum behind the Cool Boss open for air intake.
⚠
WARNING
Verify the Power Cord and Water Supply Hose are routed to prevent a tripping
hazard and are not routed under carpets or across sharp edges.
Once you have determined and moved the Cool Boss into position,
Lock a minimum of two
Casters
,
by pressing down with your foot on the large pedal locking mechanism on each Caster.
To unlock the Casters, press down on the small pedal.
⚠
CAUTION Do not start the Cool Boss until you have locked a
minimum
of two Casters; this
ensures that unintended movement caused by the thrust of the Fan will not occur.