
ISSUE-1 24/7/2017
8
Using the chopper
1.
Carefully remove the plastic blade guard and place the blade
onto the metal pin in the base of the chopping bowl (fig.4).
2.
Place the food to be chopped or blended into the bowl on top of
the blades, do not exceed the max level (600ml) marked on the
bowl.
3.
Fit the lid onto the motor housing and lock into position (fig.5).
4.
Fit the lid onto the bowl (fig.6). Do not try to use the chopper
without the lid in place.
5.
Connect to the mains, select the operation speed of choice and
when using the mini chopper, chop for a maximum of 1 minute.
If further blending is required, wait 1 minute before restarting.
6.
After a total of 3 of the above cycles, the chopper should be
rested for 20 minutes.
7.
Chop to the desired consistency – see step 6 onwards under
‘basic operation’.
Note:
Do not run the chopper empty (without the blade covered by
food).
If using to chop fruit and vegetables, remove the skins, peel or
stones and cut into small pieces before chopping. It may be
necessary to add some water when chopping vegetables or fruit.
If using to chop meat, cut the meat into small pieces before
chopping and do not add more than 200g to the chopping bowl.
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Содержание HB956SH6PB
Страница 11: ...ISSUE 1 24 7 2017 11...