Cookworks HB956SH6PB, Инструкция по уходу и эксплуатации, Страница: 6 / 11

ISSUE-1 24/7/2017 6
USING THE HAND BLENDER
1.
Carefully remove the plastic blade guard and fit
the hand blender to the motor housing and lock
into position (fig.2).
2. Place the ingredients to be blended into the
beaker or another suitable wide container with
high sides. Do not overfill the beaker (max
1100ml). The use of the beaker is not
recommended to blend thin liquids.
3. Place the container on a stable surface.
4. Place the head of the hand blender below the
surface of the ingredients. Do not immerse the
stem beyond the max level shown in the diagram
opposite.
5. Connect to the mains, select the operation speed
of choice and when using the hand blender, mix
for a maximum of 1 minute. If further blending
is required, wait 1 minute before restarting the
blender.
6. After a total of 3 of the above cycles, the blender
should be rested for 20 minutes.
7. Blend to the desired consistency – see step 6
onwards under ‘basic operation’.
Note

Do not run the blender dry (without the head covered by liquid).

To avoid splashing, ensure head of the blender is within the
blending container and the head is covered before starting or
removing.

Do not add extra ingredients into the beaker / blending container
when the blender is operating.

If using to puree fruit and vegetables, remove the skins, peel or
stones and cut into small pieces before blending.

If blending ingredients in a saucepan (e.g. to purée soups),
remove the saucepan from the heat to protect the blender from
damage.
Fig. 2
Max
insertion
level