Issue 1 6/4/2019
5
TO HEAT MILK (WITHOUT FROTHING)
Follow the directions on the previous page but fit the agitator at step
4 instead of the whisk.
Add milk up to the upper level marked on the inside of the milk
compartment. A maximum of 200ml milk may be added when not
frothing the milk.
TO FROTH MILK (WITHOUT HEATING)
Follow steps 1 – 6 above
7.
Press and hold the switch until the indicator flashes blue (approx.
2 seconds) and the milk frother will start to whisk (but not heat)
the milk.
8.
The milk frother will automatically switch off and the indicator will
revert to red.
9.
Continue from step 9 on page 4.
CLEANING
Clean the milk frother after each use.
1.
Switch off and unplug the milk frother and allow it to cool
completely.
2.
The inside of the milk frother can be rinsed between consecutive
uses or partially cleaned before carrying out a full clean. To rinse,
fill the milk compartment with 200ml of water and operate the
frother for a short interval. Discard the liquid.
3.
Remove the lid, whisk or agitator and wash these loose parts in hot
water with a little washing up liquid. Rinse and wipe dry. Not
suitable for the dishwasher.
4.
Wash the milk compartment with hot water and a little washing up
liquid. Rinse and wipe dry with a soft cloth.
5.
Wipe external surfaces with a soft damp cloth. Do not use
detergent or abrasives as these may scratch the surface.
Содержание EP2178-V
Страница 8: ...Issue 1 6 4 2019 8...