background image

CARE & CLEANING

Your CookTek Induction Cooktop is easy to keep clean. Be sure to follow these easy
instructions:
1. Turn the unit OFF and remove the plug from any power outlets prior to cleaning.
2. When the unit is cool, wipe the surface and body with a damp cloth. Use a mild

scouring agent on the stainless steel housing such as Bon Ami or Barkeeper’s
Friend for greasy or resistant soiling. Do not use a lye-based cleaner, such as an
oven cleaner, as it may damage the Cooktop.

3. To clean the glass surface, use a mild detergent or glass Cooktop cleansing cream.
4. Never immerse the Cooktop in water or put it in the dishwasher.

Your CookTek MagnaWave Cooktop has two different cooking
modes: SmarTemp and Power Cook. Professional cooks will appre-
ciate the special features and advantages of each mode.

COOKING BY SMARTEMP (TEMPERATURE)*

When your recipe requires a precise and even temperature to be maintained over a
period of time, the SmarTemp mode is ideal. Just follow these simple steps.

What to Do:

1. Turn the Cooktop “ON” by turning the control knob to the right.
2. Place cookware containing ingredients on the Cooktop.
3. Depress the SmarTemp button.
4. Turn the control knob until the desired cooking temperature appears on the LED

Display. The temperature displayed 

will change

from the set temperature to the

measured temperature 3 seconds after the control knob is moved. The LED will
show the measured temperature until the desired temperature is achieved. 

5. To turn the Cooktop off, turn the control knob to the far left until it “clicks” and

the LED display is no longer illuminated.

NOTE:

If the unit is left on and has been left unattended for 5 or more minutes

without a pan on its surface, the unit will enter a “Sleep Mode” to conserve energy.
You will know that the unit is in “Sleep Mode” because the LED will display hori-
zontal dashes. The Power Knob must be rotated in either direction to exit “Sleep
Mode” and begin normal operation.

SmarTemp monitors the temperature of the bottom of the pan.

For actual temperature of the food contents, a contact thermometer should be used.

WARRANTY STATEMENT

All commercial cooking equipment manufactured by CookTek is warranted against
defects in materials and workmanship for a period of one year from the date of Sale,
or 18 months from the date of shipment from our factory, whichever comes first.
IMPORTANT! Keep a copy of your sales receipt to verify date of purchase. A valid
proof of purchase, indicating Serial Number (s) and date of purchase is required to

4

Содержание MagnaWave MC1500












Отзывы: