CE Electric 1-Stage Knife Sharpener
Specifications
：
Name : CE Electric 1-Stage Knife Sharpener
Model : K55868
Voltage/Power : DC 18V 10W
MADE IN CHINA
1. Read and understand the instruction manual before use.
2. Do not remove the housing during use.
3. Extreme caution must be taken when sharpening.
4. Do not put the product near fire.
5. Switch off and disconnect the adapter before cleaning.
6. Do not immerse the power cord or body in water.
7. Do not disassemble the product yourself, or it may cause a malfunction.
8. Disconnect power supply when not in use.
9. When cleaning the product, wipe the surface with a soft cloth.
10. Do not cover the top of the product during use.
11. Do not let water get into the product when cleaning.
12. It may cause a slight smell during sharpening a knife. It is not a malfunction.
13. Please use the DC adapter (18V) included.
14. Place the product on a flat and dry surface.
15. Please clean the knife before sharpening.
16. No lubricant or abrasive is needed for sharpening.
17. It is not suitable for sharpening serrated or ceramic knives.
1. Switch it Off position
，
Insert the
adapter power connector into the
knife sharpener. Plug adapter
wall plug into an 120V AC Power
Outlet.
2. Power on the knife sharpener
by switching it in ON position.
3. Place the knife blade edge in
the L groove. Pull it back in
smooth motion slowly. Lift and
repeat in R groove. Do not
move it back and forth.
Attention: DO NOT TO PULL BACK AND FORTH,Ceramic knives are not suitable.
How to use
：
IMPORTANT SAFEGUARDS
：
ADAPTER INSTRUCTION MANUAL
：
CE Electric 1-Stage Knife Sharpener
U S E R ’ S M A N UA L
IMPORTANT SAFETY INSTRUCTIONS — SAVE THESE INSTRUCTIONS”
“DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS”.
C l a s s 2 P o w e r S u p p l y
Please read the following information carefully.
1. The maximum ambient temperature should not exceed 35
℃
.
2. The adaptor shall be installed according to specification.
The current of load and output power shall not exceed the following
value:
Model: HCX1201-1800600U
Input: 100-240V
～
50-60Hz 0.5A
Output: 18V 0.6A
3. Risk of Electric Shock. For indoor use only. Dry location use only.
4. This Switching Adapter is not intended to be repaired by service
personal in case of failure or component defect.
5. The main plug is used as disconnect device, the socket-outlet should
be near the Switching Adapter and it should be easily accessible.
6. This product must not be disposed together with the domestic waste.
This product has to be disposed at an authorized place for recycling
of electrical and electronic appliances.
By collecting and recycling waste, you help save natural resources,
and make sure the product is disposed in an environmental friendly
and healthy way.
7. For connection to a supply not in the U.S.A, use an attachment plug
adapter of the proper configuration for the power outlet, if needed
8. Class 2 Power Supply
Name: GUANGDONG HUACHUANGXINGPOWER SUPPLY CO.,LTD.
Address: NO.27 FUDONG ROAD,DONGFENG VILLAGE, LELIUSTREET,
SHUNDE DISTRICT, 528000 FOSHAN CITY, GUANGDONG PROVINCE
